---
title: EH-0200 Inverter
slug: inverters
description: EH0200-INF-01-V3-Brochure for grid inverter
docTags: 
createdAt: 2025-10-18T11:48:11.674Z
---

```yaml
description: EH0200-INF-01-V3-Brochure for grid inverter
```

## Overview [#h\_a6f28dd784](./#overview)

The EH-0200 inverter is an energy storage bidirectional power conversion system designed for the bidirectional energy conversion between batteries and the grid AC power. Its main component is an inverter composed of power electronic components with embedded control software.

- Three-level topology, up to 99% conversion efficiency, better power quality
- Integrated cluster-level battery management function, high battery availability
- Intelligent multi-stage fan speed regulation, wide temperature operation capacity, up to 45 °C no derating.
- Support constant power, constant current, constant voltage control, with a frequency modulation, VSG, and other functions
- Support IEC61850 protocol, with millisecond-level responsiveness
- IP66 protection, outdoor use.

## Electrical diagram [#h\_618c6e39e0](./#electrical-diagram)

## Specifications [#h\_e78fc12d0f](./#specifications)

| Battery side - DC            |                |
| ---------------------------- | -------------- |
| Max. DC voltage              | 1,500Vdc       |
| Max. DC current              | 224.5Adc       |
| Battery system voltage range | 1,000-1,500Vdc |

| Grid side - AC       |                       |
| -------------------- | --------------------- |
| Rated power          | 200kW                 |
| Max. AC power        | 220kW                 |
| Rated grid voltage   | 690Vac, 3W+PE         |
| Grid voltage range   | 586.5\~759V(settable) |
| Max. AC current      | 184.1Aac              |
| Rated grid frequency | 50/60Hz               |
| Harmonic (THDi)      | \<1.5% (100% load)    |
| AC power factor      | -1\~+1                |

| General                    |                                           |
| -------------------------- | ----------------------------------------- |
| Isolated                   | No                                        |
| Max. efficiency            | 99%                                       |
| IP protection              | IP66                                      |
| Operation temperature      | -40\~+60°C                                |
| Allowable humidity range   | 0\~100% (no condensation)                 |
| Maximum operating altitude | 4,000m                                    |
| Cooling                    | Temperature controlled forced air cooling |
| Communication Interface    | RS485/CAN/Ethernet                        |
| Dimensions（WxDxH）          | 810×275×845mm                             |
| Weight                     | 100kg                                     |
|                            |                                           |

## Proven performance [#h\_dd2b724f30](./#proven-performance)

Our inverters are based on a proven design from one of the world’s largest solar inverter manufacturers. They are fully certified by TUV according to FINGRID class A to class D for use in installation from 1MW to above 30MW and for 110kV grid connections and support all frequency regulation modes as well as grid forming where required. The inverters have also been fully tested according to ELERING requirements for class A to class D installations.

### Response time [#h\_212d93120a](./#response-time)

From the time of issuance of a Modbus power command to our BESS container controller, it takes the inverters between 150ms and 300ms to reach the required power as measured by external fast meter. This includes power commands from maximal charge power to maximum discharge power. Faster response time are possible via optimization.

### Suppliers

The EH-200-HA-M grid inverter is manufactured by SINENG Electric Co. It is also contract manufactured under licence by our joint venture partner and contract manufacturer Cubenergy. This arrangement gives us dual sourcing capabilities.

\{% file src=".gitbook/assets/EH0215HAM-Brochure-Sineng.pdf" %}